1 piece bolted bonnet, full bore through conduit, rising stem with metal floating seats with soft face seals design.
Slab gate valves minimize pressure drop as it is equivalent to that produced by a piece of pipe with the same diameter and length.
They are manufactured in a wide range of sizes and pressure classes typically from forgings.
| Perar Model: | SDTCS |
| Size: | 2” to 68”, 1 13/16” to 11” |
| Pressure Classes: | ASME 150# to 2500# API 6A 2000 to 15000 |
| Temperature Range: | -196°C to 400°C |
| Face to Face/ End to End: | API 6D/ API 6A/ Perar standard |
| Features | Features | ||
|---|---|---|---|
| Soft Seating | Standard | Stem Extension | On Request |
| Metal Seating | On Request | Extended Bonnet | On Request |
| Self-relieving Seats (SPE x SPE) | Standard | Welded Pups | On Request |
| Double Piston Effect Seats (DPE x DPE) | On Request | Sealing Areas/ Wetted Areas Overlay | On Request |
| Seat Combination (SPE x DPE) | On Request | Conformity to NACE MR0175, NACE MR-0103 | On Request |
| Vent & Drain ports | Standard | Conformity to PED 2014/68/UE, ATEX 2014/34/EU | On Request |
| Emergency sealant injection | Standard | Other Features | On Request |
| Manual operated or Actuator Operated (ISO 5210) | Standard |
| BODY, BONNET |
|
| SEALS |
|
| TRIM (EXPANDING GATE, SEATS, STEM) |
|
| SEAT HARDFACING |
|
| BOLTING |
|
If you have any questions about our products or would like more information, please do not hesitate to contact us. Fill in the form below and one of our experts will get back to you as soon as possible. Your satisfaction is our priority, and we are ready to offer you all the support you need.
