SUBSEA TWIN BALL DBB SIDE ENTRY

Subsea Twin Ball side entry valves are designed according to API6DSS, API6A, API17D with the addition of customer requirements when present. The valves do not rely on lubricant or grease to assist sealing between the ball and seat. Metal-to-metal sealing is used between the ball and seat and non-elastomeric seal are provided between the seat and body. Metal-to-metal sealing is also provided between body-to-closure and stem-to-body (optional). The Subsea Twin ball valves are actuated by Perar hydraulic actuator or gearbox as requested.

Suitable for: Subsea

BASIC CHARACTERISTICS

API6DSS, API6A, API17D design as requested
Bi-directional sealing
Spring loaded metal-to-metal seats (tungsten carbide coating 0,2 mm – 0,4 mm thickness)
Anti-blow out design stem
Non-elastomeric seals to avoid the risk of gradual degradation of the seals over their life
Full metal-to-metal sealing at any primary pressure boundary including valve stem
Forged material to comply with API6A PSL3
Valve actuation with dedicated hydraulic actuator and/or ROV operable Gearbox (fixed or retrievable)

OTHER CHARACTERISTICS

	900-1500 lbs / 3000 psi	5000 psi / 2500 lbs	7500 psi	10000 psi	15000 psi
½”-3”	Standard	Standard	Standard	Standard	Standard
4”-12”	Standard	Standard	Standard	Standard	Standard
14”-22”	Standard	Standard	Standard
24”-30”	Standard	Standard
32”-48”	Standard

Features		Features
Primary Metal Seat	Standard	Seal Welded Vent	Standard
Self relieving Seats	Standard	Electrical Continuity	Standard
Double Piston Seat	On Request	Seal Areas Overlay	Standard
Double Block and Bleed	On Request	Wetted Areas Overlay	On Request
Anti blow-out stem	Standard	Primary Metal Seals (BX)	Standard
Diver, ROV or Actuated	As Requested	Primary Metal Stem Seal	On Request
Hybrid valve (Metal SR/Soft DPE)	On Request	API6A/API17D qualification	As Requested
Bleed Valve	On Request	Stem extension	On Request

BODY, CLOSURE, PUPS	ASTM A350-LF2 + Inconel 625 overlay ASTM A694-F52/F56/F60/F65 + Inconel 625 overlay ASTM A182-F22 + Inconel 625 overlay Duplex 22% Cr Superduplex 25% Cr Inconel 625
TRIM (SEAT, BALL AND STEM)	ASTM A350-LF2 + Inconel 625 overlay ASTM A694-F52/F56/F60/F65 + Inconel 625 overlay Duplex 22% Cr Superduplex 25% Cr Inconel 625 Inconel 718
BODY SEALS / SEAT SEALS	METAL GASKET (BX type gasket/Destec) LIPSEAL– PTFE + ELGILOY CHEVRON PACK – PTFE + PEEK + ELGILOY OR – HNBR AED (for seawater sealing)
SEAT INSERT	METAL WITH TUNGSTEN CARBIDE COATING (MIN. TH. 0.2 mm) METAL WITH TUNGSTEN CARBIDE COATING (MIN. TH. 0.4 mm) PEEK / PCTFE / KEL-F / NYLON (DEVLON V-API)
BOLTING	ASTM A320-L7 / A193-B7 (XYLAN COATED, NICKEL/ZINC PLATED) ASTM A320-L7M / A193-B7M (XYLAN COATED, NICKEL/ZINC PLATED) ASTM A453-GR.660 (XYLAN COATED) UNS S32760 (25% Cr)

Downloads

Product 2

Product 3

Product 4

Product 5

Product 6

Product 7

Product 8

Product 9

Carica altro

TRUNNION MOUNTED SIDE-ENTRY BALL

SLAB GATE VALVE

TRUNNION MOUNTED TOP-ENTRY BALL VALVES

DOUBLE EXPANDING GATE

SUBSEA ROTARY GATE VALVE

SUBSEA TRIPLE NEEDLE VALVE

SUBSEA DOUBLE EXPANDING GATE VALVE

SUBSEA AXIAL CHECK VALVE

AXIAL CHECK VALUE

SUBSEA SLAB GATE VALVE WITH INTEGRAL AXIAL CHECK

SUBSEA TWIN SLAB GATE VALVE

SUBSEA TWIN BALL DBB TOP ENTRY

SUBSEA NEEDLE VALVE

SUBSEA TC SLAB GATE VALVE

SUBSEA WELDED BALL VALVE

SUBSEA SWING CHECK VALVE

SUBSEA TOP ENTRY BALL VALVE

SUBSEA SIDE ENTRY BALL VALVE

SWING CHECK VALVE

TRUNNION MOUNTED SIDE-ENTRY TWIN BALL VALVES

contact us

If you have any questions about our products or would like more information, please do not hesitate to contact us. Fill in the form below and one of our experts will get back to you as soon as possible. Your satisfaction is our priority, and we are ready to offer you all the support you need.

Headquarters

Link

Applications